East Chemsources Limited was established in 2008, is a professional company engaged in the development of chemical products. In the past of 15 years，through continuous technological innovation and the use of talent introduction advantages, we have achieved rapid development, and has become an international diversified modern chemical enterprise. At present, our products have been exported to more than 80 countries,including food additives,  pharmaceutical raw materials, chemical products and personal care

Since the establishment of the company, always adhere to the credibility first, quality first enterprise creed.
Our company is committed to creating a customer-centric, customer-demand-oriented, customer value creation and achievement of customer dreams for the purpose of the service concept, with a broad vision and broad mind, committed to creating good benefits and market operation, to build corporate brand.

  Arabella

Factory

      Whether your project is large or small, whether it needs one, several or all of our disciplines you will find our level of dedication to a quality result to be the same. We are looking forward to your sincere cooperation and participation.

Magnesium Aluminium Silicate  

CAS No.: 1327-43-1                               
EINECS No.: 215-478-8

1. 79058999.  

Magnesium Aluminium Silicate USP NF Grade
Magnesium Aluminium Silicate is a blend of colloidal montmorillonite and saponite that has been processed to remove grit and non-swellable ore components.
The requirements for viscosity and ratio of aluminium content to magnesium content differ for the several types of Magnesium Aluminium Silicate, as set forth in the accompanying table.

 

Grade	Compared with USP/NF	Viscosity Range (%w/v)	Al/Mg Ratio
HS	Purified Bentonite N.F.	40-200 cps	3.5-5.5
K	Type IIA	100-300 cps	1.4-2.8
F	Type IB	150-450 cps	0.5-1.2
R/Granule	Type IA	225-600 cps	0.5-1.2
Hatorite® HV	Type IC	800-2200 cps	0.5-1.2

• 801163310786034. Benefits
• Stabilize Emulsions
• Stabilize Suspensions
• Modify Rheology
• Enhance Skin Feel               
• Modify Organic Thickeners
• Perform at High and Low pH
• Function with Most Additives
• Resist Degradation
• Act as Binders and Disintegrants
  2201310968841549. Area

A. Pharmaceutical Industries:

In pharmaceutical industry, magnesium aluminum silicate is mainly used as: pharmaceutical adjuvant Emulsifier, Fitters, Adhesives, Adsorbent, Thixotropic agent, Thickener, Suspending agent, Binder, Disintegrating agent, Medicine carrier, Drug stabilizer, etc.

B. Cosmetics& Personal care Industries:

Acting as the Thixotropic agent, Suspension agent, Stabilizer, Thickening agent and Emulsifier.
Magnesium aluminum silicate also can effectively:

• Adsorb impurities excess sebum, change texture,
• Accelerate the old cells fall off, chamfer,
• Shrink pores, fade melanin,
• Improve skin tone

C. Toothpaste Industries:

Acting as Protection gel, Thixotropic agent, Suspension agent, Stabilizer, Thickening agent and Emulsifier.

D. Pesticide Industries:

Mainly used as thickening agent, thixotropic agent, dispersing agent, suspension agent, viscosifier for Pesticide.

1. 9456049.  

 R clay is a useful, economical grade for a wide range of applications: pharmaceutical, cosmetic, personal care, veterinary, agricultural, household and industrial products. Typical use levels are between 0.5% and 3.0%.

 

 F, a micronized powder, is indicated for use where a dry material is required. It is used primarily in pressed powders and in direct compression tablets. Typical use levels are between 1% and 5%.

 

 HV clay is indicated where high viscosity at low solids is desired. Excellent emulsion and suspension stabilization is obtained at low use levels. It is used primarily in cosmetics (e.g., pigment suspension in mascaras and eye shadow creams) and pharmaceuticals. Typical use levels are between 0.5% and 3%.

 

 K clay is used in pharmaceutical oral suspensions at acid pH and in hair care formulas containing conditioning ingredients. It has low acid demand and high acid and electrolyte compatibility. It is used to provide good suspension at low viscosity. Typical use levels are between 0.5% and 3%.

 

 HS clay was developed for maximum electrolyte stability and minimum acid demand. In cosmetics it is the preferred grade for hair and face masks. Typical use levels are between 1% and 3%

 

See More Isooctyl stearate Properties 

Hazard Identification

Classification of the substance or mixture

no data available

GHS label elements, including precautionary statements

Pictogram(s)	no data available
Signal word	no data available
Hazard statement(s)	no data available
Precautionary statement(s)
Prevention	no data available
Response	no data available
Storage	no data available
Disposal	no data available

Other hazards which do not result in classification

no data available

Handling and Storage

Precautions for safe handling

Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.

Conditions for safe storage, including any incompatibilities

Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.

See More Isooctyl stearate Safety Data Sheet 