Product Name: Sodium Chloride (NaCl)
Molecular weight：58.44
License Number：Y20190008765
Executive standard: "Chinese Pharmacopoeia" 2020 edition two
Properties: This product is colorless, transparent cubic crystal or white crystalline powder; odorless. This product is soluble in water and almost insoluble in ethanol.
Packing specification: 25kg/bag, 20kg/carton

 

Product Description: soluble in water and glycerin, slightly soluble in alcohol. At 25℃, 1g was dissolved in 2.8ml water, 2.6ml boiling water, 10ml glycerol, and very slightly dissolved in ethanol. Its solubility in water decreased due to the presence of hydrochloric acid and it was almost insoluble in concentrated hydrochloric acid. Aqueous solution is neutral, pHo6.7-7.3. Median lethal dose (rats, oral) was 3.75+/-0.43g/kg.

Purpose: Determination of silver nitrate reference. Microdetermination of fluorine and silicate. Used for high purity analysis. Routine blood tests. Liver function tests. Bacterial serological medium was prepared. Refrigerating mixture. Food preservation. A photograph. Analytical reagents, drop analysis of fluorine and silicate, chromatographic analysis reagents.

Melting point: 804 ℃

Boiling point: 1413 ℃

Density: 2.165

Soluble: Soluble in water and glycerin, slightly soluble in alcohol

Storage: Keep sealed.

 

Transportation information

Dangerous Goods Mark: C

 

Risk terms: R36: eye irritation ‖R22

 

Safety Terms: S24/25:

 

Dangerous goods Number: UN 2924 3/PG 2

 

UN number: None

 

Package mark: Sodium chloride (NaCl)

 

Transportation precautions: light, light unloading, avoid direct sunlight, rain should be covered

 

Avoid collision, fall, extrusion, and not mixed with acid and alkali transport

 

Matters needing attention

Overview of folding Hazards

This PRODUCT USUALLY DOES not BELONG to DANGEROUS goods, BUT in the case of especially low concentration, mixed with some gases, may appear explosion, combustion and other special and drastic chemical changes, thus causing danger. The ignition point of this product is not high, but the concentration of the explosion is more strict, usually, in the concentration of -0.00001% to -0.02458%, relatively easy to explode. Therefore, when conducting different dimensional chemical experiments, we should be extra careful and pay attention to safety.

 

Toxicity of folding

This product has no chemical toxicity, but excessive ingestion can cause cell dehydration and death in severe cases. LD50(rat oral) : 3.75±0.43g/kg.

 

Skin contact: Clean with water after skin contact.

 

Ingestion: In case of excessive consumption, drink more water (e.g., drink sugar water, drink salt boiled water) or use other measures (e.g., injection of normal saline [mass fraction of sodium chloride solution of 0.9%]) to maintain the body moisture, otherwise, the consequences are very serious (will show the symptoms of dehydration).

 

Folding fire protection measure

Danger characteristics: This product is a low toxic chemical products, not flammable, no special requirements for fire protection.

 

Harmful combustion products: no harmful combustion products.

 

Folding leakage emergency treatment

Emergency treatment: replace the bag in time.

 

Elimination method: clean, recycling can be.

 

Folding operation disposal and storage

Storage precautions: SHOULD be stored in cool, room temperature avoid light, ventilated dry place, can stack put, to prevent rain, not with acid and alkali mixed storage, stack bottom to lay wood, to moisture-proof, stack put height not more than two meters.

 

Folding contact control/personal protection

Respiratory protection: Wear a mask.

 

Eye protection: If sodium chloride crystals get into your eyes, flush them with plenty of water

CERTIFICATE   OF   ANALYSIS

PRODUCT  NAME	Sodium Chloride
PRODUCTION DATE	2022-5-14 ．		ANALYSIS DATE		2022-5-14 .
TOTAL AMOUNT	520 MT .		BATCH  NO .		20220514-2 .
RESULT     OF    ANALYSIS
SPECIFICATIONS		STANDARDS		RESULT  OF  ANALYSIS
SODIUM  CHLORIDE		≥ 99.10 %		99.57 %
MOISTURE		≤ 0.30 %		0.07 %
INSOLUBLE  MATTER IN  WATER		≤ 0.05 %		0.01 %
WHITENESS		≥  75		89
SIZE		0.15mm—0.85mm ≥85 %		94 %
POTASSIUM FERROCYANIDE  (  ANTI-CAKING  AGENT  E - 536  )		≤ 10 mg / kg		5.3 mg / kg
CONCLUSION		THE  PRODUCT  IS  UP  TO  GRADE .
REMARKS                 GB / T  5461 – 2016.

Founded in 2008, East Chemsources Limited is a professional manufacturer of supplier in food and pharmaceutical field in China.Through more than four years development, QINGDAO EAST CHEMSOURCES TRADE CO.,LTD,there is new branch office Qingdao East Chemsources Limited,our company has developed from single product at first to providing solution to finished products now, is committed to providing solutions for success and growth through long term relationships.

Currently, our products have been exported to more than 50 countries all over the world. Our service is accomplished by providing good quality solution that matches the specifications of our clients at competitive price. Our products will derive from trusted sources and arrive to our clients in time and well arranged manner, be creating the greatest benefits for our customers.

  Whether your project is large or small, whether it needs one, several or all of our disciplines you will find our level of dedication to a quality result to be the same. We are looking forward to your sincere cooperation and participation.